Mini ACDP Clone Gearbox on Audi Vl381 (0AW) Without Soldering

Yanhua Mini ACDP Module

Written by:

ACDP Module 13-VW/Audi Gearbox Clone supports VW (Volkswagen), Audi DQ200 (0AM / 0CW), DQ250 (02E / 0D9), DL382 (0CK), DL501 (0B5), VL381 (0AW) models and etc. This post will share the test report on Audi VL381 (0AW) gearbox clone.

This is Audi VL381 (0AW) gearbox
Audi VL381 (0AW) gearbox

Plug the Yanhua ACDP module 13-VL381 interface board into gearbox

Make sure the red cap on OBP+ICP adapter is in JOIN position
Connect Mini ACDP with OBP+ICP adapter and connect to module 13 via cable
yanhua mini acdp

Start to read data from this original gearbox 1
Select VW-> Gearbox Clone-> Audi-> VL381 (0AW)-> Full Backup

Read out the system info is VL381

Then read PFLASH and EEPROM data
Save the chip data read out

Next, plug module 13 into the donor gearbox 2
donor gearbox 2

Select “Full Write”
Confirm the system info and continue
Select the original backup file to write

Write data successfully

Result: Yanhua Mini ACDP with module 13 have success in gearbox clone on Audi VL381 (0AW)

Yanhua ACDP VW/Audi Gearbox Clone Module 13 with License A600:

Yanhua Mini ACDP Programming Master Basic Version with License A801:

error: Content is protected !!