Mini ACDP Land Rover 2015-2018 KVM Key Programming

Yanhua Mini ACDP Module

Written by:

Yanhua Mini ACDP with module 9 can perfectly add key and do all keys lost for new Jaguar and Land Rover from year 2015 to 2018 without soldering.

The comparison between ACDP and other devices for reading/writing JLR KVM data:

1.Using traditional way-soldering:


1).Require soldering, which is complicated and takes long time to operate;

2).Require removing the crystal oscillator and capacitance, which is difficult. It’s also easy to break and crash and full of high risk;

3).Manual soldering is risky and unreliable. Any faulty solder may cause data lost.

2.Using ACDP with module 9 by ICP mode


1).The interface board replaces the welding wire to make the operation simple and efficient;

2).No cutting lines, no lifting pins, no removing components, no soldering and no risk of module damage.

3).Pin intelligent detection to ensure data reading/writing safe, efficient and reliable.

Mini ACDP Land Rover KVM key programming vehicle coverage:

Range Rover 2015-
Land rover Aurora 2015-
Land rover discovery 2015-
Jaguar XE/XEL 2015-
Jaguar XJ 2015-
Jaguar F-Type 2015-

Range rover sport 2015-
Land rover Star pulse 2015-
Land rover discovery 4 2015-
Jaguar XF/XFL 2015-
Jaguar F-Face 2015-

Mini ACDP with module 9 package list:

1.ACDP programmer configuration List (ACDP host)

2.ACDP module 9 Jaguar/Land Rover KVM module

Mini ACDP Land Rover KVM add key & all keys lost guide:

1.Prepare the OBP+ICP adapter, KVM interface board, KVM module, BAV adapter and blank key

2.Connect all the devices correctly

3.Run Mini ACDP

Select “LandRover”->“LandRover (2015-)”-> “IMMO”-> “KVM ICP (MC9S12XEQ384)”-> “Add key auto mode”

4.Follow the software prompts to save the original EEPROM and DFLASH data read from KVM module

Note: ACDP device is forbidden to be powered off during the process of adding a key. Otherwise it will cause the key to fail to be added.

Video reference:

More info about ACDP module 9 Land Rover KVM module, here you can go:

error: Content is protected !!