Yanhua Mini ACDP refreshes BMW 6HP transmission

Yanhua Mini ACDP Test

Written by:

How to use Yanhua Mini ACDP to refresh BMW 6HP transmission? Here is step-by-step guide for Mini ACDP owners.

Adapters and modules you need:

Yanhua Mini ACDP

OBP+ICP adapter

EGS interface board

EGS module

Tips and guides for Mini ACDP owners:

Step 1: Short the jumper cap to the “CAN-R-Join” end according to the marked position

2

Step 2: Connect ACDP, OBP+ICP adapter, EGS interface board and EGS module

Step 3: Open “Mini ACDP” APP

Step 4: Choose “BMW”

Step 5: Choose “EGS Refresh”

Step 6: Choose “6HP data refresh”

Step 7: Choose “Data refresh”

Step 8: Connect the ACDP device to the EGS and Click “OK”

Step 9: Check VIN and other information

Step 10: Reading data

Step 11: Save the data file

Step 12: Data save path

Step 13: Continue to write data

Step 14: Download new data

Step 15: Attention prompt message and click “OK”

Step 16: Writing data

Step 17: Finish uploading file then save it

Job’s done

error: Content is protected !!