mini acdp bmw Tag Archive

Yanhua Mini ACDP Module

Mini ACDP BMW CAS4 Key Programming Mileage Reset via OBD (Works 100%)

Do you wonder if “ACDP still killing CAS4?” Some customers say that they have not had any issues. Some customers say ACDP 0km mileage reset damaged the EEPROM content in cas4 +. ISN immobilizer codes were triggered and the car stopped firing. In fact, Mini ACDP becomes more and more stable for key programming and […]

Read More

Yanhua Mini ACDP ModuleYanhua Mini ACDP Sale

Mini ACDP Renew CAS3 Data Tips & Guide

As some customers don’t know how to change CAS3 VIN, DME/EGS ISN, etc data using Mini ACDP, this post will share the guide to help you. In general, there is no need to change CAS data for regular key programming. It applies to change second-hand engine and gearbox or install to other cars after clearing the […]

Read More

Yanhua Mini ACDP Module

Mini ACDP BMW CAS3/3+ Decryption Data Failed Solution

Sometimes, when you use Mini ACDP with module 1 to read CAS3/3+ by ICP mode, and all the pin detection pass, but suddenly it appears the error “Memory Decryption failed. Please check if the memory model is correct.” Or “Analyze the data error. Please check this CAS is a new CAS or blank CAS.” as […]

Read More

Yanhua Mini ACDP Module

How to Choose Yanhua Mini ACDP Gearbox Module?

There are 3 Mini ACDP Gearbox modules designed for different car models. What’s the difference between them? How to choose the one you need? Just go ahead to read the post. Yanhua Mini ACDP Gearbox modules: BMW Gearbox EGS ISN Module (ACDP Module 11) VW/Audi Gearbox Clone Module (ACDP Module 13) Volvo/Landrover/Ford MPS6 Gearbox Clone Module (ACDP module […]

Read More

Yanhua Mini ACDP Module

How to Solve CAS3+ Keyless Go Cannot Work by Mini ACDP?

Can Yanhua Mini ACDP program key to CAS3+ Keyless Go? I have added new keys to CAS3+ Keyless Go, the key and remote can work normally, but Keyless Go cannot. This problem asked from customer recently. Yanhuaacdp.com technician gives a advice as below. Only 2 keyless Go are allowed for one car. It needs to write at […]

Read More

Yanhua Mini ACDP Test

Yanhua Mini ACDP refreshes BMW 8HP EGS: What do I need to buy? How to do?

Q: I want to refresh BMW 8HP EGS with Yanhua Mini ACDP. What do I need to buy? How to do? A: You just need ACDP basic master and Acdp moduel 11. Here you can have:http://www.yanhuaacdp.com How to refresh BMW 8HP EGS with Yanhua Mini ACDP? Here is step-by-step guide as below. Part 1: Connect to Yanhua Mini ACDP Part 2: […]

Read More

Yanhua Mini ACDP Test

Yanhua Mini ACDP refreshes BMW 6HP transmission

How to use Yanhua Mini ACDP to refresh BMW 6HP transmission? Here is step-by-step guide for Mini ACDP owners. Adapters and modules you need: Yanhua Mini ACDP OBP+ICP adapter EGS interface board EGS module Tips and guides for Mini ACDP owners: Step 1: Short the jumper cap to the “CAN-R-Join” end according to the marked position 2 Step 2: Connect […]

Read More

error: Content is protected !!