Newest Mini ACDP software releases a new function on Aug.27th, 2020. It can support BMW E Chassis 8HP EGS ISN Clear no need soldering now.
Let’s see the new function.
What’s the advantage of this module function?
-Support clearing ISN of BMW 8HP via OBD/Bench
-The special interface board connection method replaces the traditional plugging wire method to prevent plugging wire to opposite direction and wrong place.
-Very simple and efficient! Plug and play! Safe and reliable!
Which car models are supported?
BMW RR1/RR2/RR3/E70/E71/E72/E81/E84/E87/E88/E89/E90/E91/E92/E93,etc.
How to use?
What you need:
1.Yanhua Mini ACDP basic module
https://www.yanhuaacdp.com/wholesale/yanhua-mini-acdp-basic-moduel.html
2.8HP ISN Clear (Support E Chassis) authorization
3.Module 11 BMW-CAS4 Interface Board (supposed to have module 11 first, then 8HP ISN Clear authorization)
https://www.yanhuaacdp.com/wholesale/mini-acdp-bmw-gearbox-egs-isn-module.html
Procedures:
Step 1: Prepare ACDP, OBP+ICP adapter, EGS interface board and EGS module
Step 2: Connect the 8HP end of the EGS interface board to the EGS module interface
Step 3: Short the CAN termination resistor on the OBP+ICP adapter to the “CAN-R-Join” terminal
Step 4: Connect the ACDP, OBP+ICP adapter, EGS interface board and EGS module
Step 5: Run Mini ACDP
Select “BMW”-> “EGS refresh”->“8HP ISN Clear (Support E Chassis)”
Then you can do any function below depends on your need
– EGS State
-Clear ISN
-Reset adaptation
-Upgrade program
-Modify VIN
