This is a question recently asked by one customer from yanhuaacdp.com.
The answer is YES. What you need is Yanhua Mini ACDP programming master basic version + ACDP BMW ISN Module 3+ DME N55 Integrated Interface Board.

It’s easy to read BMW ISN by Yanhua ACDP via bench mode no need to open the DME shell, no need to drill the hole and no need to insert the cable.

Connection:
Step 1: Please prepare ACDP, OBP+ICP adapter, Mini ACDP N55 interface board and DME module
Step 2: Connect the interface board correctly to the DME interface as shown
Step 3: Short the CAN resistor on the OBP + ICP adapter to the “CAN-R Join”
Step 4: Connect ACDP, OBP+ICP adapter, ACDP BMW N55 interface board and DME

Operation:
Run Mini ACDP APP
Select BMW-> DME ISN-> BENCH Mode Read/Write DME ISN-> FXX-> N55 (MEVD172G)

Firstly identify the DME to check if the module is normal, and then read the ISN.

Click “Help” to check the specific connection diagram and follow the on-screen instruction to operate correctly

During the operation, please pay attention to the following notice.
1.Please connect ACDP with DME properly;
2.Please don’t cut the power nor pull out the device during the programming;
3.Please carefully backup the ISN data.

Yanhua Mini ACDP Programming Master Basic Version with License A801:
https://www.yanhuaacdp.com/wholesale/yanhua-mini-acdp-basic-moduel.html

Yanhua Mini ACDP BMW ISN Module 3:
https://www.yanhuaacdp.com/wholesale/yanhua-mini-acdp-bmw-isn-code-reading-by-obd.html

Yanhua Mini ACDP DME N55 Bench Integrated Interface Board:
https://www.yanhuaacdp.com/wholesale/acdp-dme-n55-integrated-interface-board.html