Q: Can I use mini acdp to clone Bmw ecu mg1 and md1? If can, how to do?
A: Yes.
Here is the related ACDP BMW ECU MG1 and MD1 type list.
F chassis:
B37 (MD1CS001)
B38 (MD1CS001)
B48 (MG1CS003)
B48 (MG1CS201)
B58 (MG1CS003)
S63 (MG1CS201)
G chassis:
B46 (MG1CS201)
B47 (MD1CP002)
B47 (MD1CS001)
B48 (MG1CS003)
B48 (MG1CS201)
B57 (MD1CP002)
B58 (MG1CS003)
B58 (MG1CS201)
N63 (MG1CS201)
N74 (MG1CS003)
N74 (MG1CS201)
R chassis:
B37 (MD1CS001)
B48 (MG1CS201)
Guide to clone BMW ECU MG1 MD1 by Yanhua Mini ACDP:
You should use Mini ACDP programmer+ ACDP ECU clone software + the corresponding Integrated Interface Board.
For BMW B37/B47/N47/N57 Diesel Engine Computer ISN Read/Write and Clone, you can buy ACDP BMW X1/X2/X3 Bench Interface Board.
For B48/B58/N74 ISN Reading and Clone via Bench Mode, you can buy Yanhua ACDP BMW B48/B58 Benzh Interface Board.
For N13/N20/N63/S63/N55/B38 DME ISN read and write, you can buy ACDP N13/N20/N63/S63/N55/B38 DME Interface Board.
Operation:
Step 1: Prepare ACDP, OBP+ ICP adapter, interface board and DME
Step 2: Connect the interface board correctly to the DME interface
Step 3: Short the CAN resistor on the OBP+ICP adapter to the “CAN-R Join”
Step 4: Connect ACDP, OBP+ ICP adapter, interface board and DME
Step 5: Enter Mini ACDP APP
Select BMW-> ECU Clone-> Select the corresponding ECU module
Step 6: Read /write EEPROM
Step 7: Read/Write PFLASH
