Yanhuaacdp.com has released a new essential tool for outdoor programming. It is called YANHUA Vehicle Power Supply ADC Adapter.
What can ACDP Vehicle Power Supply ADC Adapter do?
ADC Adapter has excellent quality as you expected, whether you take power from the car cigarette lighter socket or from the car battery, it can be widely used in a variety of 12V and 5VD electrical appliances or mobile phone, extend your work area from inside to outside of the car, make your workspace wider and more convenient. At the same time, it accurately monitors and protects the output voltage and current of the power supply to ensure the safety of your device.
What’s the feature of ACDP Vehicle Power Supply ADC Adapter?
1.Input (battery alligator clip) reverse connection protection
2.Monitor and protect 12V power output
3.5V USB output current protection
How to use ACDP Vehicle Power Supply ADC Adapter?
Connection diagram:
Method 1: Connect car cigarette lighter
Step 1: Connect car cigarette lighter
Step 2: Connect Yanhua Mini ACDP device
Step 3: Connect other devices
Method 2: Connect car battery
Step 1: Connect positive pole of vehicle battery
Step 2: Connect negative pole of vehicle battery
Step 3: Connect Mini ACDP device
Step 4: Connect other device
What should you note when using ADC Adapter?
When you use ADC Adapter, you should pay attention to the following use environment:
1.Dry: Cannot get wet or rain.
2.The ambient temperature should be between -20 ℃ and 40℃.
3.Ventilation: Ensure that there is no foreign matter within 5cm above the Adapter surfaces and that the other surfaces are well ventilated.
Vehicle Power Supply ADC Adapter FAQ:
Problem 1: No voltage and current display or the indicator light of the cigarette lighter plug does not light up.
The possible reasons:
1.Bad car battery
2.Positive and negative connection reverse
3.The connection is not reliable
The corresponding solutions:
1.Check the battery and deal with it according to the specific situation
2.Check whether the battery clip is correct
3.Check the connection of battery clip and cigarette lighter connector
Problem 2: The buzzer gives and alarm sound or the indicator light of the cigarette lighter plug is on
The specific situations:
1.The buzzer sounds for 1 second and stops for 5 seconds
2.The buzzer sounds for 1 second and stops for 1 seconds
3.The buzzer beeps for a long time, and the current shows normal
4.The buzzer beeps for a long time, and the current display “Err”, the voltage display “OCP”
The corresponding solutions:
1.Check whether the displayed voltage is lower than 10,5 V
2.Check whether the displayed voltage is lower than 10 V
3.Check whether the displayed voltage is lower than 9 V
4.The output load of the cigarette lighter holder and the DC power plug is overloaded or short-circuited. Please remove the load and plug in the device again (repower on).
YANHUA Vehicle Power Supply ADC Adapter:
https://www.yanhuaacdp.com/wholesale/yanhua-vehicle-power-supply-adc-adapter.html
